自動打膠機可以很大程度上解放人力，同時也可以提高，下面雙組份打膠機廠家就給大家普及一下自動打膠機常見問題剖析以及解決辦法，希望對大家有所幫助！
Automatic gluing machine can greatly liberate human resources, but also can improve efficiency, the following two-component gluing machine manufacturers to popularize the automatic gluing machine common problems analysis and solutions, I hope to help you!
毛病1：內行走進程時或傳動中止時，有玻璃渣呈現。
Faults 1: Glass slag appears when the internal walking process or transmission stops.
毛病剖析：
Analysis of defects:
（1）膠嘴的護套損壞。解決方法：換護套。
(1) The sheath of the rubber nozzle is damaged. Solution: Change the sheath.
（2）鋁槽深度檢測探頭行走時滑到玻璃。解決方法：調理探頭使其在鋁槽的中心行走。
(2) Aluminum groove depth detection probe slides to glass when walking. Solution: Conditioning the probe to move in the center of the aluminium groove.
（3）擋膠板與刮膠板的行進力氣太大。解決方法：調理行進氣缸的速度。
(3) The driving force of the baffle and scraper is too large. Solution: Adjust the speed of the cylinder.

毛病2.機頭在前移時總是把玻璃頂走
Faults 2. The nose always pushes the glass away when moving forward.
毛病剖析：
Analysis of defects:
（1）機頭行進定位螺栓松動。解決方法：調理好并固定好。
(1) Loosening of heading positioning bolt. Solution: well conditioned and fixed.
（2）玻璃定位松動，使其失去效果。解決方法：調定好定位。
(2) The position of glass is loosened, which makes it ineffective. Solution: Set a good position.
（3）吸盤前后的活動量太大或吸盤的真空發生器損壞。解決方法：修理。
(3) The activity of the sucker before and after the sucker is too large or the vacuum generator of the sucker is damaged. Solution: Repair.
（4）前移氣缸的行進力氣太大。解決方法：調理行進速度。
(4) The forward-moving cylinder has too much driving force. Solution: Adjust the speed of travel.
毛病3.作業傍邊各個動作不協調
Faults 3. Discoordination of various movements at the edge of the work
毛病剖析：
Analysis of defects:
（1）設定有誤。解決方法：從頭設定。
(1) The setting is wrong. Solution: Set it up from scratch.
（2）氣動體系配件老化。解決方法：替換。
(2) Aging of pneumatic system fittings. Solution: Replacement.
以上精彩內容由雙組份打膠機廠家整理提供，更多精彩內容歡迎大家多多關注我們的官網：http://www.gugezh.cn！多謝大家的支持。
The above wonderful content is provided by the two-component glue maker. More wonderful content is welcome to pay more attention to our official website: http://www.gugezh.cn! Thank you for your support.